|
Depot Institutionnel de l'UMBB >
Publications Scientifiques >
Publications Internationales >
Veuillez utiliser cette adresse pour citer ce document :
http://dlibrary.univ-boumerdes.dz:8080/handle/123456789/14137
|
Titre: | Geomechanical modeling to assess the injection-induced fracture slip-potential and subsurface stability of the Cambro-Ordovician reservoirs of Hassi Terfa field, Algeria |
Auteur(s): | Benayad, Soumya Sen, Souvik Baouche, Rafik Mitra, Sourav Chaouchi, Rabah |
Mots-clés: | Fluid injection Geomechanical modeling In-situ stresses Naturally fractured reservoirs Reservoir stability Slip potential |
Date de publication: | 2024 |
Editeur: | Elsevier Ltd |
Collection/Numéro: | International Journal of Rock Mechanics and Mining Sciences/ Vol. 178, Art. N°105775 (2024); |
Résumé: | The in-situ stress state and the distribution of the critically stressed fractures have significant implications on optimum wellbore placement, production enhancement, fluid injection, and induced seismicity which largely influence the reservoir management strategies. This study presents a comprehensive geomechanical modeling to infer the likelihood of shear slippage of the optimally oriented weak planes in response to water injection in the deep Paleozoic oil reservoirs from the Hassi Terfa field, central Algerian Sahara. The ‘B-quality’ compressive failures, i.e., breakouts from the acoustic image log indicate the maximum horizontal stress azimuth as N114°E. The inferred in-situ stress magnitudes indicate a strike-slip tectonic regime in the study area. The reservoir is generally tight (porosity <8 %, permeability <0.4 mD) due to extensive silica cementation, however pre-existing closed to partially open natural fractures of variable geometries are identified on cores, thin sections, and image logs. The stress-based slip assessment indicates that none of the fracture geometries is critically stressed and hydraulically conductive at the initial reservoir stress state. The onset of slip on the critically oriented vertical fractures can initiate at 1200 psi of fluid injection at the reservoir level of ∼3500 m. The E-W to EES-WWN oriented fractures, parallel to the maximum horizontal stress azimuth, have a higher likelihood of being critically stressed during injection and therefore can contribute to the permeability enhancement. We restrict the practical injection threshold at 3000 psi, which can create tensile failures on the shale caprocks. We infer that the NE-SW and NNE-SSW striking, steeply dipping fractures and regional faults being perpendicular or at high angles to the regional maximum horizontal stress azimuth, are the most stable ones and therefore, less likely to slip within the practical injection limit. |
URI/URL: | https://www.sciencedirect.com/science/article/abs/pii/S1365160924001400?via%3Dihub https://doi.org/10.1016/j.ijrmms.2024.105775 http://dlibrary.univ-boumerdes.dz:8080/handle/123456789/14137 |
ISSN: | 1365-1609 |
Collection(s) : | Publications Internationales
|
Fichier(s) constituant ce document :
|
Tous les documents dans DSpace sont protégés par copyright, avec tous droits réservés.
|