DSpace
 

Depot Institutionnel de l'UMBB >
Mémoires de Master 2 >
Institut de Génie Electrique et d'Electronique >
Telecommunication >

Veuillez utiliser cette adresse pour citer ce document : http://dlibrary.univ-boumerdes.dz:8080/handle/123456789/9610

Titre: Design and implementation of microstrip Ultra-Wide Band Bandpass filter with and without dual notched band
Auteur(s): Aliouane, Mohamed Abdelbasset
Skoudarli, Abdelhamid
Challal, M. (supervisor)
Mots-clés: Bandpass filter (BPF)
Ultra-wideband (UWB)
Stepped-impedance stub (SIS)
Date de publication: 2019
Editeur: Université M’Hamed BOUGARA de Boumerdes : Institut de génie electrique et electronique (IGEE)
Résumé: This work presents a novel compact ultra-wideband bandpass filter (UWB BPF) with and without dual notched band. It is based on symmetrical structure of a simple uniform line loaded by a stepped-impedance stub (SIS) connected at its center. Two notches are inserted at 5.8 and 8.0 GHz to eliminate WiMAX and satellite communication interferences by embedding two U-shaped slots in the ground plane. The proposed UWB BPF with dual-notch is simulated, fabricated and measured. Satisfactory results are obtained, achieving good performances in terms of ultra-wide impedance bandwidth of 7.7 GHz (2.9 - 10.6 GHz) with a fractional bandwidth of 118.8 %, return loss better than 13 dB, an upper stopband attenuation higher than 20 dB up to 16 GHz, and a sharp selectivity.
Description: 68 p.
URI/URL: http://dlibrary.univ-boumerdes.dz:8080/handle/123456789/9610
Collection(s) :Telecommunication

Fichier(s) constituant ce document :

Fichier Description TailleFormat
Design and Implementation of UWB BPF With and Without Dual Notched Band.pdf3,72 MBAdobe PDFVoir/Ouvrir
View Statistics

Tous les documents dans DSpace sont protégés par copyright, avec tous droits réservés.

 

Valid XHTML 1.0! Ce site utilise l'application DSpace, Version 1.4.1 - Commentaires