Depot Institutionnel de l'UMBB >
Publications Scientifiques >
Publications Internationales >
Veuillez utiliser cette adresse pour citer ce document :
http://dlibrary.univ-boumerdes.dz:8080/handle/123456789/12060
|
Titre: | Petrophysical and geomechanical characterization of the Late Cretaceous limestone reservoirs from the Southeastern Constantine Basin, Algeria |
Auteur(s): | Baouche, Rafik Sen, Souvik Shib Sankar, Ganguli Boutaleb, Khadidja |
Mots-clés: | Geomechanics Petrophysics Rock core laboratory measurements Carbonate |
Date de publication: | 2021 |
Editeur: | Seg library |
Collection/Numéro: | Interpretation/Vol. 9 , N° 4 (2021); |
Résumé: | We have characterized the petrophysical and geomechanical properties of the Late Cretaceous Turonian and
Cenomanian carbonate reservoirs from the southeast Constantine Basin, northern Algeria. In general, Turonian
carbonates exhibit a wide range of porosities (2%–15%) and permeabilities (0.001–10 mD), whereas the Cen-
omanian reservoir appears to be very tight (<6% porosity and <0.1 mD permeability). Based on their storage and
hydraulic flow characteristics, these carbonates were classified into two distinct reservoir rock types (RRT):
RRT-I is hosted by nano- to microporosities that displays poor reservoir qualities compared to the RRT-II, con-
sisting of mesoporous Turonian intervals (>10% porosity and 0.5–10 mD permeability). The reservoir pore-pres-
sure gradient is interpreted to be a little above the hydrostatic (0.51 psi/ft), whereas the minimum horizontal
stress (Sh) has a 0.72 psi/ft gradient. In situ stress analysis establishes a dominant strike-slip tectonic stress field
in the basin. Shale intercalations associated with the carbonate facies are characterized by comparatively high
failure pressure that can lead to wellbore failures, which may be avoided considering the recommended mini-
mum drilling mud weight as obtained from the rock failure criterion. Extensive wellbore breakouts (C-quality)
were observed in the acoustic image logs recorded in the studied reservoir intervals, inferring a mean maximum
horizontal stress azimuth of 350°N. We recommend that deviated wells in the direction of the interpreted Sh
orientation (approximately east–west) using hydraulic fracturing can be useful to attain optimum wellbore sta-
bility and effective permeability enhancement. Our findings have significant implications for enhanced produc-
tion within the tight carbonate reservoirs situated in a strike-slip domain. |
URI/URL: | https://doi.org/10.1190/INT-2020-0249.1 http://dlibrary.univ-boumerdes.dz:8080/handle/123456789/12060 |
ISSN: | 2324-8858 |
Collection(s) : | Publications Internationales
|
Fichier(s) constituant ce document :
|
Tous les documents dans DSpace sont protégés par copyright, avec tous droits réservés.
|