Depot Institutionnel de l'UMBB >
Publications Scientifiques >
Publications Internationales >
Veuillez utiliser cette adresse pour citer ce document :
http://dlibrary.univ-boumerdes.dz:8080/handle/123456789/13425
|
Titre: | Design and experimental implementation of voltage control scheme using the coefficient diagram method based PID controller for two-level boost converter with photovoltaic system |
Auteur(s): | Latreche, Kamel Taleb, Rachid Bentaallah, Abderrahim Maamar, Alla Eddine Toubal Helaimi, M’Hamed Chabni, Fayçal |
Mots-clés: | power electronics Energy conversion Two-level boost converter Coefficient diagram method controller |
Date de publication: | 2024 |
Editeur: | National Technical University "Kharkiv Polytechnic Institute" |
Collection/Numéro: | Electrical Engineering and Electromechanics/ Vol. 2024, N° 1(2024);pp. 3 - 91 |
Résumé: | Introduction. Currently, in the solar energy systems and a variety of electrical applications, the power converters are essential part. The main challenge for similar systems is controller design. In the literature, the PID controller has proved its effectiveness in many industrial applications, but determining its parameters remains one of the challenges in control theory field. The novelty of the work resides in the design and experimental implementation of a two-level boost DC-DC converter controlled by a PID controller for photovoltaic (PV) maximum power extraction. Purpose. Analysis and control of the two-level boost topology with renewable energy source and design of the PID controller parameters using simple and accurate method. Methods. PID coefficients are optimized using Coefficient Diagram Method (CDM) in the MATLAB environment. Results. A mathematical model of a two-level boost converter with PID controller and PV energy source was developed and analyzed. The model allows to design the controller parameters of the proposed system. Practical value. A prototype steered by the proposed CDM-PID controller was tested using an Arduino embedded board. A comparison between the simulation results and the experimental one is presented. The obtained results illustrate that the experimental results match the simulation closely, and the proposed CDM-PID controller provides a fast and precise results. References 24, table 2, figures 16. |
URI/URL: | https://doi.org/10.20998/2074-272X.2024.1.01 http://eie.khpi.edu.ua/article/view/286824 http://dlibrary.univ-boumerdes.dz:8080/handle/123456789/13425 |
ISSN: | 2074-272X |
Collection(s) : | Publications Internationales
|
Fichier(s) constituant ce document :
|
Tous les documents dans DSpace sont protégés par copyright, avec tous droits réservés.
|